Marlin Forums banner

308ME Lever Evolution Powder

2436 Views 3 Replies 3 Participants Last post by  Hyphenated
I couldn't get close to published numbers in my 308ME using traditional powders so I had to find out if Hodgdon's new lever gun powder would improve my numbers. First things first....always start low and work loads up watching for signs of pressure. The following info was safe in my rifle, but may not be in yours, so use caution.

I used four brands of bullets I had on hand which would not be considered premium bullets, but good affordable hunting bullets. Whichever bullet showed the most promise in this test would go to the range for accuracy testing in the future.

I won't bore you with all the numbers in the process and cut right to the chase. The big question is, will this powder enable you to match a box of factory ammo? Well, yes and no. This is what the factory claims from their website.
150gr. - 42.0gr = 2632fps
160gr. - 41.5gr = 2658fps (Hornady 160gr FTX ammo listed at 2660fps)
170gr. - 41.4gr = 2565fps

I could not achieve any of those velocities using their load data. I was shooting a 22" barreled rifle versus their 24", so my goal was to just come within 40fps of their data. My results were as follows.

Hornady 150gr RN - 2.5% over max load 2567fps
Nosler 150gr. SBBT - 2.5% over max load 2673fps (worst ES)
Winchester 150gr. PSP - 2.5% over max load 2621fps
Remington 165gr. Core-Lokt - 1% over max load 2525fps (best ES)

The Hornady RN fell way short and I wasn't going to push it any harder. Both the Nosler and Winchester bullets did finally match or exceed factory velocities, but the extreme spread was so high I would not consider them for a practical hunting load. Last, but not least, the Rem. 165gr bullet fell short of the 160 bullet by over 125fps, but came pretty close to the 170gr load. This load also had the smallest extreme spread.

This small test just barely scratches the surface of this powders capabilities. But I think it proved to me why Hornady chose the 160gr bullet for their factory .308ME ammo.

Attachments

See less See more
1 - 1 of 4 Posts
I need a chronometer. Maybe for Christmas.
You and me both duster......If the elves around here havnt gotten the hint, I know Santa personnely and will have one shortly after.......:cool:

Hyphenated...what brand/model chrono do you have. Been looking at the Chrony Beta Master.....any suggestions ??
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top