Marlin Forums banner

Something NOT to do in my tumbler any more !!

3892 Views 21 Replies 7 Participants Last post by  greyhawk50
Switched out the Tumbling Media from Walnut Shell with Rouge to Plain Walnut shell. WHAT A MESS !! The red dust was CAKED in the bottom and along the side of the Bin. Had to Scrape and use a Metal wheel to get it out. I think tumbling Sized brass to remove the Sizing lube is what caused it. From now on will clean the brass in either Water/dish detergent or spray down with brake cleaner. Then will dry them before trimming.
1 - 1 of 22 Posts
I just use the corn cobb stuff. It does come with some kind of polisher in it. But hey, I just clean'em up a bit.
1 - 1 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top