Marlin Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
853 Posts
Removing the butt stock is pretty straight forward....just one bolt in the tang. The forearm is a little trickier. IIRC the model 30 has a fore end cap versus the band. The mag tube will have to be removed to take the cap off and get to the wood. It is not a difficult process just be mindful to hang on to the tube plug and spring to prevent it from flying across the room. Once you have that done the cap and wood will slide right off.
Good Luck
 
1 - 1 of 1 Posts
Top