I went to the range yesterday and I noticed that the accu trigger or whatever you wish to call it seemed stiff. It may have been just from not being shot in a while. As the day went on it got better, oiled it up, no results. Has this happened to anyone before, need some help on this one.
"As the day went on it got better, oiled it up, no results." ^^ Not exactly sure what you mean by this ^^
"It may have been just from not being shot in a while." OK...How long has it been since it was used last...?
Try a good cleaning, degreasing and a light dry lube/teflon. Old lube may have picked up crud and hardened up.
I have a few savage rifle with accu-trigger..on the 7-08 the spring under the adjustment screw was bound up or so it seemed, I gave it a wiggle with some needle nose and it seemed to be fine
I fixed it, the grease from the factory gunked up I just blew it out with some compressed air and it worked
Ya it's all better, I got it last may so i have shot it a few times. I only cleaned the trigger assembly once, I spray it with cleaner but I never did a full cleaning.